Imaging Systems: RP1 Imaging System
Imaging Systems: RP1 Imaging System
PHYSICAL | |
Size | 3.375” (W) x 3.375” (D) x 10.5” (H); 0.05 ft3 (1,500 cm3) |
Weight | 2.2 lbs. |
Ergonomics | Easy grip imaging head; 10’ black silicone umbilical cord |
Air flow | Rear cover only. No air flow with sterile drape on |
Storage Conditions | 50° to 100° F (10° to 38° C); 20%-75% relative humidity, non-condensing |
Operating Conditions
|
50° to 100° F (10° to 38° C); 20%-75% relative humidity, non-condensing
|
IMAGING HEAD | |
FLARE® compatibility | RP2, RP1, RP1v (RC2v only) photonic control units (PCUs) |
Positioning | Handheld or locking dovetail mount to accessory arm |
Operational verification | On-demand using PCU calibration system |
Laser safety | Laser-on LEDs 180˚ apart on imaging head |
Sterile operation
|
Optional hermetically sealed drape/shield combination w/ ≥ 94% transmission (one-time use)
|
OPTICS | |
Reach | 10’, black silicone umbilical cord |
Working distance | Variable 6”-15” |
Lens | Manual zoom-focus levers with locking heads. Aberration corrected from 400-900 nm |
Square FOV (WD) | 0% ZOOM: 5.1 cm (@6”); 7.9 cm (@9”); 11.0 (@12”); 13.0 (@ 15”)
100% ZOOM: 1.7 cm (@6”); 2.7 cm (@9”); 3.7 (@12”); 4.6 (@ 15”) |
Diagonal FOV (WD) | 0% ZOOM: 7.2 cm (@6”); 11.1 cm (@9”); 15.6 (@12”); 18.4 (@ 15”)
100% ZOOM: 2.3 cm (@6”); 3.8 cm (@9”); 5.2 (@12”); 6.5 (@ 15”) |
System resolution | Minimum 30 µm, dependent on WD and zoom level |
Simultaneous video streams | 4 (color video, NIR Channel #1, NIR Channel #2, Color- NIR Merge |
Color video channel | 400-660 nm illumination w/ variable intensity (see PCU); 400-650 nm imaging |
NIR channel #1 | Illumination Class 3R laser, 665 ± 3 nm w/ variable intensity (see PCU); Imaging 685-735 nm |
NIR channel #2 | Illumination Class 3R laser, 760 ± 3 nm w/ variable intensity (see PCU), Imaging ≥ 781 nm |
Merge channel | Geometric or mathematical, including dual-NIR ratiometric |
Visible fluorescence compatibility for HFT™ | RC2v equipped with special filtration for compatibility with Histofluorescence Tomography™ (HFT) using GFP and/or RFP, as well as all standard FLARE® wavelengths (requires RP1v PCU) |
Image resolution | 1024 x 1024 pixels |
Bit depth | 10-bits each for red, green, blue, NIR Channel #1, and NIR Channel #2 |
Exposure time | 66 µsec to 3 sec; each channel with independent exposure |
Readout rates | 20 Hz at full resolution of all channels |
CURADEL will provide the following service and support for FLARE Devices during the term of the applicable warranty.
Customers of Curadel FLARE® devices may opt to purchase Curadel Platinum Service, a comprehensive maintenance and service contract that will cover each purchased device for an additional 12 (twelve) months beyond the expiration of the warranty. All maintenance and repairs on devices not under an active warranty or service contract in need of repair will be billed at the standard labor rate plus cost of parts.
The above warranties do not cover defects resulting from improper or inadequate maintenance, installation, repair or calibration performed by Customer or a third party not authorized by CURADEL; Customer or third party supplied hardware or software, interfacing or supplies; unauthorized modification; improper use or operation outside of the Specification for the Product; abuse, negligence, accident, loss or damage in transit; or improper site preparation.
11 Erie Drive
Natick, MA 01760 USA
T +1 508 305 2355
F +1 508 251 2029
USA Orders
877 -CURADEL
877-287-2335
International Orders
+1 508 251 2355
Fax
+1 508 251 2029